J2 Engineering Lug Nuts (M12 x 1.25) 20 Piece Set With Closed End - Black / Blue Red
Fitment Information
- Vehicles with 4 or 5 Lug M12 X 1.25 Threads
- All Infiniti 1990+All Nissan / Datsun 1968+ (Excludes Titan XD)All Subaru 1977+
-
Only Fits Wheels with Acorn (Conical Taper) Seats
Specs & Features
-
Material: T6-7075 Forged Aluminum (Aircraft-Grade Strength)
-
Finish: Anodized (Black, Blue, or Red)
-
Thread Pitch: M12 x 1.25 (Subaru, Nissan, Suzuki, Infiniti, etc.)
-
Seat Type: 60-Degree Conical Seat.
-
Torque Spec: 70-90 ft-lbs (Hand torque recommended).
-
Base Width: 25mm Outside Diameter.
-
Style: Closed-End Acorn (Protects studs from elements)
- Height Options: Available in 35mm (Short/Standard) or 50mm (Extended).
- Protective Closed-End Design: Seals the top of the lug nut to block out rain, snow, and road salt, preventing your wheel studs from rusting or seizing.
-
Aircraft-Grade Strength: Forged from T6-7075 Aluminum, offering superior tensile strength compared to standard 6061 alloy while weighing only ~35 grams per lug.
-
Perfect Stance: Available in 5 total heights ranging from 75mm to 123mm, allowing you to dial in the perfect amount of "poke" for your specific wheel offset.
- Performance Engineering: The ultra-lightweight construction reduces rotational mass for better handling, while the 60-Degree Conical Seat ensures a safe, vibration-free lock on aftermarket wheels.
Product Description
If you are tired of your build looking "almost" done, these lugs are the missing piece. Designed specifically for the M12x1.25, this 20-piece kit gives you that rock-solid clamp load you need but adds a visual pop that boring stock hardware just can’t touch. Whether you are building a track weapon, a show pony, or just a daily driver that needs some love, these lugs command attention without trying too hard.
Let's talk specs without the boredom: these are forged from T6-7075 aluminum. That means they are incredibly light (great for reducing unsprung weight/rotational mass) but tough enough to handle serious torque. The anodized coating is there to fight off the nasty stuff—corrosion, fading, and brake dust—keeping your setup showroom-fresh while the other guys are dealing with rust.
The best part? You get to choose your vibe. From super-clean close-ended styles to aggressive removable spike caps, you control the aesthetic. They use a standard conical seat to ensure a vibration-free fit, keeping your wheels aligned and safe. Don’t skimp on the parts that actually hold your car to the road—lock it down with J2.
Standard Warranty
All J2 Engineering products come with a 30-day limited manufacturer’s warranty covering defects in materials and workmanship under normal use. This warranty does not cover wear and tear, misuse, or improper installation.
⚠️ Extend Product Protection Recommended
To ensure peace of mind and protect your investment long-term, we strongly recommend purchasing an Extend product protection plan available during checkout. Extended coverage can offer added security & support beyond the standard 30-day warranty period.
Original: $57.80
-65%$57.80
$20.23More Images
J2 Engineering Lug Nuts (M12 x 1.25) 20 Piece Set With Closed End - Black / Blue Red
Fitment Information
- Vehicles with 4 or 5 Lug M12 X 1.25 Threads
- All Infiniti 1990+All Nissan / Datsun 1968+ (Excludes Titan XD)All Subaru 1977+
-
Only Fits Wheels with Acorn (Conical Taper) Seats
Specs & Features
-
Material: T6-7075 Forged Aluminum (Aircraft-Grade Strength)
-
Finish: Anodized (Black, Blue, or Red)
-
Thread Pitch: M12 x 1.25 (Subaru, Nissan, Suzuki, Infiniti, etc.)
-
Seat Type: 60-Degree Conical Seat.
-
Torque Spec: 70-90 ft-lbs (Hand torque recommended).
-
Base Width: 25mm Outside Diameter.
-
Style: Closed-End Acorn (Protects studs from elements)
- Height Options: Available in 35mm (Short/Standard) or 50mm (Extended).
- Protective Closed-End Design: Seals the top of the lug nut to block out rain, snow, and road salt, preventing your wheel studs from rusting or seizing.
-
Aircraft-Grade Strength: Forged from T6-7075 Aluminum, offering superior tensile strength compared to standard 6061 alloy while weighing only ~35 grams per lug.
-
Perfect Stance: Available in 5 total heights ranging from 75mm to 123mm, allowing you to dial in the perfect amount of "poke" for your specific wheel offset.
- Performance Engineering: The ultra-lightweight construction reduces rotational mass for better handling, while the 60-Degree Conical Seat ensures a safe, vibration-free lock on aftermarket wheels.
Product Description
If you are tired of your build looking "almost" done, these lugs are the missing piece. Designed specifically for the M12x1.25, this 20-piece kit gives you that rock-solid clamp load you need but adds a visual pop that boring stock hardware just can’t touch. Whether you are building a track weapon, a show pony, or just a daily driver that needs some love, these lugs command attention without trying too hard.
Let's talk specs without the boredom: these are forged from T6-7075 aluminum. That means they are incredibly light (great for reducing unsprung weight/rotational mass) but tough enough to handle serious torque. The anodized coating is there to fight off the nasty stuff—corrosion, fading, and brake dust—keeping your setup showroom-fresh while the other guys are dealing with rust.
The best part? You get to choose your vibe. From super-clean close-ended styles to aggressive removable spike caps, you control the aesthetic. They use a standard conical seat to ensure a vibration-free fit, keeping your wheels aligned and safe. Don’t skimp on the parts that actually hold your car to the road—lock it down with J2.
Standard Warranty
All J2 Engineering products come with a 30-day limited manufacturer’s warranty covering defects in materials and workmanship under normal use. This warranty does not cover wear and tear, misuse, or improper installation.
⚠️ Extend Product Protection Recommended
To ensure peace of mind and protect your investment long-term, we strongly recommend purchasing an Extend product protection plan available during checkout. Extended coverage can offer added security & support beyond the standard 30-day warranty period.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Fitment Information
- Vehicles with 4 or 5 Lug M12 X 1.25 Threads
- All Infiniti 1990+All Nissan / Datsun 1968+ (Excludes Titan XD)All Subaru 1977+
-
Only Fits Wheels with Acorn (Conical Taper) Seats
Specs & Features
-
Material: T6-7075 Forged Aluminum (Aircraft-Grade Strength)
-
Finish: Anodized (Black, Blue, or Red)
-
Thread Pitch: M12 x 1.25 (Subaru, Nissan, Suzuki, Infiniti, etc.)
-
Seat Type: 60-Degree Conical Seat.
-
Torque Spec: 70-90 ft-lbs (Hand torque recommended).
-
Base Width: 25mm Outside Diameter.
-
Style: Closed-End Acorn (Protects studs from elements)
- Height Options: Available in 35mm (Short/Standard) or 50mm (Extended).
- Protective Closed-End Design: Seals the top of the lug nut to block out rain, snow, and road salt, preventing your wheel studs from rusting or seizing.
-
Aircraft-Grade Strength: Forged from T6-7075 Aluminum, offering superior tensile strength compared to standard 6061 alloy while weighing only ~35 grams per lug.
-
Perfect Stance: Available in 5 total heights ranging from 75mm to 123mm, allowing you to dial in the perfect amount of "poke" for your specific wheel offset.
- Performance Engineering: The ultra-lightweight construction reduces rotational mass for better handling, while the 60-Degree Conical Seat ensures a safe, vibration-free lock on aftermarket wheels.
Product Description
If you are tired of your build looking "almost" done, these lugs are the missing piece. Designed specifically for the M12x1.25, this 20-piece kit gives you that rock-solid clamp load you need but adds a visual pop that boring stock hardware just can’t touch. Whether you are building a track weapon, a show pony, or just a daily driver that needs some love, these lugs command attention without trying too hard.
Let's talk specs without the boredom: these are forged from T6-7075 aluminum. That means they are incredibly light (great for reducing unsprung weight/rotational mass) but tough enough to handle serious torque. The anodized coating is there to fight off the nasty stuff—corrosion, fading, and brake dust—keeping your setup showroom-fresh while the other guys are dealing with rust.
The best part? You get to choose your vibe. From super-clean close-ended styles to aggressive removable spike caps, you control the aesthetic. They use a standard conical seat to ensure a vibration-free fit, keeping your wheels aligned and safe. Don’t skimp on the parts that actually hold your car to the road—lock it down with J2.
Standard Warranty
All J2 Engineering products come with a 30-day limited manufacturer’s warranty covering defects in materials and workmanship under normal use. This warranty does not cover wear and tear, misuse, or improper installation.
⚠️ Extend Product Protection Recommended
To ensure peace of mind and protect your investment long-term, we strongly recommend purchasing an Extend product protection plan available during checkout. Extended coverage can offer added security & support beyond the standard 30-day warranty period.
