Bilstein B8 Performance Plus Hyundai Genesis Coupe RWD (2010-2016) Front Strut 35-197348 or Rear Shock 24-193702

Image for display purposes only. Actual product may vary.

Fitment Information

• Hyundai Genesis Coupe 2.0T RWD (2010, 2011, 2012, 2013, 2014, 2015, 2016)
• Hyundai Genesis Coupe 3.8L V6 RWD (2010, 2011, 2012, 2013, 2014, 2015, 2016)
  
• Note: Mounting plates are not included and must be sourced separately
• Note: Select Front or Rear from the dropdown. Front struts are sold individually (1 per unit), rear shocks are sold individually (1 per unit)

Fitment Note: This listing covers the front strut (35-197348) and rear shock (24-193702) for the 2010-2016 Hyundai Genesis Coupe in RWD configuration only, across both the 2.0T and 3.8L V6 engines. Select the position you need from the dropdown. Front struts and rear shocks are sold individually, so two units are needed per axle for a full front or rear replacement. Mounting plates are not included and must be sourced separately. Factory shock mounting bolts are reused during installation. The B8 Performance Plus is specifically valved for use with aftermarket lowering springs and production sport suspensions. It is not designed to be run with the stock factory springs, where the B6 Performance series would be the correct choice instead.

Specs and Features

• Front Strut Part Number: 35-197348, sold individually (qty 2 needed for full front axle replacement)
• Rear Shock Part Number: 24-193702, sold individually (qty 2 needed for full rear axle replacement)
• Designed specifically for use with aftermarket lowering springs and production sport suspensions, not intended for stock spring use
• Monotube gas-pressure construction for consistent, fade-free damping, the largest available piston diameter for this class for better heat dissipation and control vs twin-tube designs
• Application-specific valve settings tuned by Bilstein for the Genesis Coupe's suspension geometry and spring rate requirements when lowered
• Provides sharper response, better traction, and more precise steering feedback compared to stock dampers on a lowered car
• Factory hardware reused for installation, mounting plates sold separately
• Bilstein limited lifetime warranty

Adjustability & Range

• Fitting Position: Front or Rear Axle (Left or Right)
• Shock Absorber Type: Gas Pressure
  
• Shock Absorber Design:
  • Front: Suspension Strut
    
  • Rear: Spring-bearing Damper
    
• Shock Absorber Mounting Type:
  • Front: Top pin / Bottom Clamp
    
  • Rear: Bottom eye / Top pin
    
• Shock Absorber System:
  • Front: Single Tube Upside Down
    
  • Rear: Monotube

Specs & Features

• Sold Individually
• Designed for nearly every lowering spring set and sport vehicle.
  
• Improved safety and performance for vehicles with lowering springs.
  
• Sporty ride quality combined with a high level of comfort.
  
• Precision handling and optimized vehicle control for enhanced driving experience.
  
• Equipped with BILSTEIN gas pressure technology for consistent performance.
  
• Features BILSTEIN mono-tube/Upside-Down technology for durability and stability.
  
• Made in Germany with renowned engineering excellence.
  
• Road-tested and fine-tuned by BILSTEIN for superior performance.

Pairs well with:

• Eibach Sportline Lowering Springs for Hyundai Genesis Coupe 2.0T (09-14) / 3.8L (09-16) The B8 Performance Plus is valved specifically for use with lowering springs, not stock springs. The Eibach Sportline drops the front 1.4 inches and the rear 1.6 inches and is exactly the kind of spring this Bilstein damper was designed to work alongside, giving you the matched spring rate and damping behavior that makes the whole suspension setup feel like one cohesive unit rather than mismatched parts.

OEM Part Numbers Cross Reference

• 54651-2M001 / 54651-2M000 (OEM Front Strut Assembly, Hyundai Genesis Coupe 2010-2016 RWD)
• 55311-2M000 / 55311-2M001 (OEM Rear Shock Absorber, Hyundai Genesis Coupe 2010-2016 RWD)

The OEM part numbers above are provided as reference for what the Bilstein B8 Performance Plus units replace on the 2010-2016 Genesis Coupe. Note that OEM numbers can vary slightly by production date and trim level. Confirm your specific factory part numbers using your VIN at a Hyundai dealer or via an OEM parts reference site if needed.

Product Description

The key difference between this and the B6 Performance: the B6 is valved for stock springs, the B8 is valved for lowering springs. If you're dropping the Genesis Coupe on Eibach Pro Kits or Sportlines and want shocks that are actually tuned for the rate those springs run, the B8 is the right call. Running the B8 on stock springs will make the car feel stiffer and less comfortable than the B6 would in that same application, since the damping is tuned to work with a stiffer-than-stock spring rate. The front strut (35-197348) and rear shock (24-193702) are each sold individually, so you need two of whichever position you're replacing, and mounting plates are not included.

Bilstein B8 Performance Plus dampers offer a performance boost over standard OE dampers, specifically designed to work with aftermarket lowering springs. Featuring a monotube design and application-specific valve settings, these dampers maximize vehicle handling. They are rigorously tested to meet or exceed OE standards, ensuring top-quality performance.

Ideal for enhancing handling and achieving a sportier look, Bilstein B8 Performance Plus dampers pair perfectly with lowering springs. Their precision engineering and world-renowned Bilstein quality make them the go-to choice for those seeking improved performance and a sleek, lowered stance.

Redline360 sells only new, genuine and authentic Bilstein products.